Industrial Hygiene in Construction

Unfortunately this website has taken a backseat to actual work. My apologies for not updating the information, and especially to trusted subscribers of this site.

In the coming months, I plan to publish more posts with the same type of information. Thanks for hanging on. – Alden

As a preview: Did you notice that the State of Michigan OSHA (MIOSH) has updated (lowered) their lead (Pb) blood level mandates? Sadly, it took a lot of people being overexposed to lead (remember Flint, MI?) in order to make this simple change. I hope other states follow.

Honestly, I did not think lead exposure to adults (and even kids in small amounts) was an issue. Mainly because:

• OSHA has good (protective) rules on lead in construction (updated in 1993) and they mimic the ACGIH TLVs.
• We all have lead in our blood. (…and I seem to be doing fine)
• We are doing better as a society. For example: no more* leaded gasoline.

But, one technical session last year at a conference changed my mind. We have a long ways to go.

The point: low levels of lead may have significant health consequences. And, if you have lead (Pb) in your body–it is from a source.

If I haven’t convinced you, the CDC is also considering ANOTHER reduction in childhood blood lead levels. In 2012 they reduced the advisory blood lead levels (in children) to 5 ug/dl. Later this month (Jan 17, 2017) they are meeting to consider reducing this level to 3.5 ug/dl! Whether of not they reduce it, the fact they are considering it should further our attention.

And, if you think this just applies to industries with heavy lead, think again. It has A LOT to do with construction.

“Construction Program researchers and the New Jersey Department of Health and Senior Services (DHSS) conducted a surveillance study in 1993 and 1994 involving the voluntary participation of 46 construction workers’ families. BLL (blood lead level) testing of young children indicated that the workers’ children, particularly those under age six, were at greater risk of having elevated BLLs (≥ 10 µg/dL) than children in the general population”

We (you) must pinpoint the source of your lead exposure. And, it may not be obvious. Since lead exposure can occur from airborne levels and by ingestion, the sources of lead exposure can vary widely.

For example, in Flint, Michigan they changed water sources to a more natural one. But, *spoiler alert*, the water had more salt – which was corrosive – which leached higher levels of lead from the pipes. Other sources can include: kids toys, jewelry, fishing weights, battery recycling, glass manufacturing, etc. (the picture of the above light pole looks like galvanized metal, but actually contained 45% leaded paint!)

What to do…

• Train and make people aware of the issue (free video that we produced! 1:31)
• Blame someone. Just kidding. Find the source of your lead exposure.
• Before starting a project, know where the lead paint is, and the activities you plan on performing.
• Get your blood tested for lead levels
• Wear the proper PPE and ESPECIALLY have good hygiene
• Perform air monitoring (and probably wipe sampling) to verify lead is not escaping from project.

If you are in the United States, you have probably been hearing issues with lead (Pb) exposures. The main focus lately has been in Flint, Michigan and their (new) source of water, which contains high levels of the metal. Wiki here.

So, who is to blame?

The NY Times suggests we should blame HUD for the millions of pounds of lead in paint. However, I’m not so sure we can cast all of the blame on them, the legislators, or manufactures. But, we are going to be dealing with lead exposures in the future.

I do not know the depth and extent to which lead poisoning is occurring throughout the US. I’m not sure anyone really does. But, there are MANY sources of lead exposure. For example: leaded gasoline (tetraethyl lead) was used in the past, aviation fuel (av gas low lead) still is, lead in paint, lead in copper pipe solder, lead in fishing weights, lead in ammo, lead in sheet rock, lead in Chineese toys…I could go on.

Bottom line though, if you (or your kids) have elevated lead levels,…there is a source. So, What To Do? Here’s my takeaways:

• Test you & your kids for their blood lead levels.
  • It is a very established method, but isn’t an exact science. Don’t freak out if they are above “background” levels. Just do what you can.
  • The CDC recently lowered their recommended blood lead threshold to 5 ug/dl of blood.
  • Don’t do chelation therapy, unless the blood lead level is REALLY high. How high? I’m not a doctor.
  • DO eat lots of vegetables and fruit. These have found to lower lead levels the best (but maybe not the fastest).
• Find the source.
  • Keep looking, there might be more than one. School, work, hobbies, nearby businesses, daily activities.
  • Measure: dirt, water, paint, your workplace.
  • Consider how small an amount is dangerous. 5 micrograms in 1 deciliter of blood. 5 micrograms is 5 millionth of a gram. A fruit fly weighs about 200 micrograms. So, cut a fruit fly into 200 pieces, take 5 of them…you get the idea.
• Tell others.
  • Recommend that others investigate for themselves.