NIOSHÂ has just recommended a new exposure limit (REL) for hexavalent chromium. The new limit is 0.2 ug/m3 as an 8-hour TWA. If you remember, the OSHA PEL is 2.5 ug/m3 (8-hour TWA). SO, if you’re good at math, you can see this is A LOT lower.
The reasoning for this level is they have found a lung cancer risk (get this) EVEN AT 0.2 ug/m3. They recommend bringing airborne levels below this limit for lung exposures.
As I’ve described before, exposures are not limited to just inhalation. Dermal contact is a big concern.
If you have any hexavalent chromium at your facility, or stainless steel (welding, welding2, hardfacing, etc.) you need to do more than just air sampling. You need a comprehensive program including wipe samples, medical monitoring, etc. This may not be a specific OSHA rule for your facility.  However, these exposures are something you must manage.