Entries tagged with “hearing”.


It’s sad to say, but many construction companies have not yet started a formal hearing conservation program. Their solution is to purchase the best earplugs, for the lowest cost, and give them away like candy.

As I’ve mentioned before: Sometimes OSHA’s rules are protective (meaning: you will be safe) and other times they are really not on par with the health research. Hearing loss and OSHA’s method of measuring noise are NOT protective to employee health (your hearing). For the best method of measuring noise, look to the recommended guidelines of the ACGIH. In order to get the exact parameters, you must purchase their Guide to Occupational Exposure Values (TLVs) booklet. It hasn’t changed (at least for noise) for a few years, but it is still the most up to date on health for your hearing. Here’s a summary of some differences:

  • Exchange rate (how noise doubles and is averaged over time)
    • OSHA uses 5, ACGIH uses 3 >>which means noise doubles every 5, or 3 dB increase
    • this makes a BIG difference in your accumulated average noise level (TWA).
  • Exposure Limit, or Criterion Level
    • OSHA says 90 dBA, ACGIH says 85 dBA
    • Doesn’t seem too different (-5), but remember noise is logarithmic and it’s measured different by OSHA & the ACGIH

NIOSH also has some guidelines, which are very similar to the ACGIH.NIOSH noise

There are some strong benefits to having a hearing conservation program. Here are some examples and suggestions for bettering your own program.

If you have worked in construction for any period of time, you know how loud it can be, and how much exposure is out there. Don’t assume working in this industry that hearing loss will to happen to you. Do something about it. Here’s a presentation from CDC/NIOSH a few years back on how to start.

Hair growth for your ears! This type of hair growth is different than the hairs which grow longer as you get older… Longest-ear-hair

The problem with most types of hearing aids, cochlear implants, and other types of enhancements is that they only amplify the body’s ability to hear. I talked about a type of pill we someday might be able to take that helps, here.

Research has found a way to regrow the hairs in your ear…well, at this point, only in mice. But, in theory, you could put these hair growth cells in the part of your ear where you have the most damage…and, well, it might help!

The summary article is here. The original article is here. And, to nerd-out, here is the research paper.

Yes. If you are in construction, I recommend it. Here’s why:

First, the rules. OSHA does NOT have a specific construction standard for hearing conservation. Why does this matter? Well, the current OSHA rules state that if you have 1 day (that’s only one day) of average noise level above an average of 85 decibels A-weighted (dBA), called the Action Limit, you are required to start a program. Obviously noise levels vary on construction jobsites. I’d guess that most projects have at least one day of levels above 85dBA’s.

And, these particular OSHA rules are terrible. Well, they are terrible if you care about your hearing. (see my earlier post). The rules are simply not protective enough. If you are exposed to noise for 8-hours a day at 90 dBA (the OSHA average exposure limit) you WILL have hearing loss (this is without hearing protection). Does that seem like a very protective rule?  I’ve heard talk about them changing it, but…I doubt it will ever happen.

Second, let’s consider cost vs. reward. To start a hearing conservation program you must measure your employees hearing , called audiometric testing (and do a few other things). It costs approximately $20/employee to do this per year. Compare this with the average claim (of hearing loss) cost of around $20,000. So, if you have 20 employees, and it costs you $400/year…it takes about 50 years to pay yourself back for NOT starting a program. ($20,000/400= 50 years)

Third, consider your employees. Having their hearing checked may seem like a hassle and a worthless exercise, but, some will appreciate it. I’ve found that employees like to know how they are hearing. It’s good if your employer cares how well you hear. It’s also a yearly reminder in hazard awareness to noise.

Because in construction, we know there’s noise!

If you’re dead-set on NOT having a program, you’ll need documented noise dosimetry for each employee, job task, and possible overexposure above 85 dBAs. It is possible  for a construction company to avoid having a program, but you have the burden to prove there isn’t noise. Call your favorite industrial hygienist for help.

I get the best questions from employees as I’m setting them up to wear a dosimeter. (FYI- this does not really apply to sound level readings, only dosimetry)

  • Why do I have to wear the monitor (dosimeter)? Can’t we just place it in the middle of the area?

Ideally we want the dosimeter to measure the individual exposure. Many factors influence the average noise level, including work practices, location (sound bouncing & dampening), height, proximity to others, equipment, etc.

  • What is the dosimeter actually measuring?

A dosimeter measure the sound pressure level, measured in decibels A-weighted, dBA (usually). It can record this level and average it (usually) for every 1 minute period. The amount of information it gathers is staggering…and confusing.

  • What if we work a longer shift (more than 8 hours) will the results of the noise monitoring be the same?

Yes, the results are (usually) given as an average. So, in theory, if you measure the noise for 15 minutes and it is the same for the next 7.75 hours, it should be the same. However, if you work more than 8-hours a day OSHA actually decreases the amount of noise you can be exposed to. They have a table (G-16)  that attempts to explain it.  If you know the average level of noise (say it’s an average of 95 dBA 8-hour TWA), then you can determine the time you are allowed (answer: 4 hours).

  • How often should noise monitoring be performed?

There is not a specific rule from OSHA on how often you must monitor. However, the guideline is yearly.  Or if/when significant changes occur “which might effect the results of this testing” (I always use this statement in my reports).

  • Which individual employees should have their noise level measured?

It is best to let the industrial hygienist make this determination (there are several good reasons). If you are just starting out, they will often choose an average, or those who might have the highest noise level exposures.

  • I’m wearing hearing protection, why don’t they take that into account when they determine the average readings?

Your exposure is determined without regard to the specific type of hearing protection used. If you are wearing the wrong type of hearing protection, or if it is worn incorrectly, you could still have this exposure.